New innovation for car body shops
SmartPuller dent pulling system with movable stand
Autorobot Finland has developed a new dent pulling system called SmartPuller. The new innovation makes the straightening of vehicle panels and box structures faster and more economical. The special features of Autorobot SmartPuller are easy and quick to use. The equipment is suitable for almost all kind of car body dent pulling.
An easy use of the equipment has been achieved with the movable stand with the wheels and the adjustable rubber pads. Both upper and lower rubber pads can be set to the strong areas of the body which allows the best support for each area to be straightened. In addition, Autorobot SmartPuller needs a resistance welder for fixing the washers or welding wire to the area to be pulled.
The specialty of SmartPuller is its ability to pull dents almost all over the body in all needed directions.
According to the information from the insurance companies, approximately 80 % of all damages are surface panel ones. The surface damage often appears on the box structures which cannot be pulled from inside of the car. An exterior straightening with the use of SmartPuller means remarkable saving to working time because the doors and other body structures will not need to be disassembled and reassembled. The advantages of SmartPuller can be best noticed in the repair of the large dents on the welded sides of the car and the roof. This is why SmartPuller is one of the most important equipment in the modern body shops.
Patent pending.
—
For media inquiries, please contact us at [email protected], +358 50 3622 130.
